Start with why LED
Anything mounted permanently on a roof edge has to hold up outside every day. That rules out the bulbs that go in a tub in January. The case for LED is heat, power draw and durability, and all three matter when the thing never comes inside.You do not have to follow the technical side to make a good decision. But it is worth knowing what you are buying, since the detail in the answer says a lot. The people who explain it plainly are generally the ones doing it properly.
The aluminum part
The LEDs sit inside a color matched aluminum channel. The channel is the reason the system looks like nothing
https://alexisehhr246.quillnesty.com/posts/permanent-holiday-lights-one-install-every-holiday-should-you-install-permanent-holiday-lights-here-is-what-to-weigh in daylight, and it is also what controls the direction of the light. It gets painted to your trim color before it goes up, so the daytime house does not change.
Individual diodes, not one long bulb
Each LED in the run is addressed on its own. Without individual control the whole house is one shade at a time. With it patterns become possible. The capability sits there unused most of the year, and then it is December.Look at somebody's finished work at noon rather than at nine, because night hides sloppy mounting and daylight does not.
The rest of the system
Behind the visible run there is a wire path, a power connection and a controller. How that wiring is routed is one of the better tells of install quality. Ask how the wiring is concealed while it is still a conversation.
What it means that it never comes down
Permanent means it stays, which is the appeal and also the responsibility. A system put up carefully asks very little of you. A sloppy install becomes visible the moment the lights are off. That is why who installs it is not a detail.
What the system has to survive
Nothing about leaving it up is theoretical once August arrives. Summer heat on a south facing roof edge is considerable, and heat is the enemy of anything with a circuit in it. Moisture finds every weak joint. Which is why the connections, the seals and the way the wire is terminated matter as much as the diodes.
The control nobody mentions
These systems dim, which is worth knowing before you decide anything. Full brightness is a holiday setting, and it is far more light than an ordinary evening wants. Most people settle at a fraction of full output, since restraint is what makes it look considered.
Seeing it before you commit
Reading about the hardware only gets you so far. What actually answers the question is a design for your specific house. EverCrest Lighting does permanent LED lighting for homes and businesses throughout Upstate South Carolina and Western North Carolina, based in Greenville. The consultation is free. Reach them at (864) 252-1732 or
[email protected].